2004 Ford Mondeo

Exhaust heatsheid/s loose

Exhaust rear silencer outer skin corroded.

Fuel Pipe/s corroded ()

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Signs of various corrosion to vehicle underside,

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Offside Rear Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))

Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Exhaust heatsheid/s loose

Exhaust rear silencer outer skin corroded.

Fuel Pipe/s corroded ()

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Signs of various corrosion to vehicle underside,

Brake performance not tested due to a leaking metal brake pipe and flat tyre (3.7.A.1)

Offside Front Tyre has a tear, caused by separation or partial failure of its structure inner edge. also worn Void of tread on inner edge (4.1.D.1b)

Offside Rear Braking system leaking Brake pipe (3.6.A.1)

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure inner side wall. Tyre was flat at time of test. (4.1.D.1b)

Windscreen washer provides insufficient washer liquid Both (8.2.3)

All four brake discs showing surface corrosion

Anti-roll bar rubber bush deteriorated but not resulting in excessive movement Both rear D-bushes (2.4.G.2)

Exhaust back box deteriorated from corrosion but not yet leaking any exhaust gasses.

Nearside Front Tyre worn almost void of tread on inner edge and perished

Offside Rear shock casing looks to be repaired via either braising or weld.

Underside of vehicle has a product (underseal) covoring brake pipes, fuel pipes and various other parts

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear brake binding (3.7.B.1)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear wheel bearing rough when rotated (2.6.1)