2006 Kia Sorento

Brake pedal wearing smooth (1.1.2 (c))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to sill end (6.1.1 (c) (i))

Nearside Rear Upper Suspension arm fractured corroded and has come detached from axle (5.3.3 (b) (ii)) DANGEROUS

Brake pedal wearing smooth (1.1.2 (c))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Nail in tyre

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Brake pedal wearing smooth (1.1.2 (c))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material both front to rear above tank (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Brake pedal wearing smooth (1.1.2 (c))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material both front to rear above tank (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Brake pedal wearing smooth (1.1.2 (c))

Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Brake pipe corroded, covered in grease or other material both before axle (1.1.11 (c))

Rear axle corroded

Headlamp aim unable to be tested both (4.1.2 (b))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength on axle (5.3.6 (a) (i))

Brake pedal wearing smooth (1.1.2 (c))

Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Brake pipe corroded, covered in grease or other material both before axle (1.1.11 (c))

Rear axle corroded

Headlamp lens slightly defective deteriorated (4.1.1 (b) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Headlamp lens slightly defective deteriorated (4.1.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive axle (5.3.6 (a) (i))

tow bar slightly corroded

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Offside Rear Nail in tyre

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive axle (5.3.6 (a) (i))

tow bar slightly corroded

Anti-roll bar linkage ball joint has slight play both rear (5.3.4 (a) (i))

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Under-trays fitted obscuring some underside components