2007 Volkswagen Polo

Headlamp levelling device cannot be operated from the driver's seat (4.1.5 (b))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced [sill section is holed]. (6.1.1 (c) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced [sill section is holed]. (6.1.1 (c) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Parking brake lever defective but can be satisfactorily operated [requires attention near travel limits]. (1.1.6 (d))

Rear [ exhaust heat shield is insecure/loose].

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm cords showing (5.2.3 (e)) DANGEROUS

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge Wearing on outer edge (5.2.3 (e))

Rear Coil spring corroded (5.3.1 (b) (i))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Tyre(s) of different sizes are fitted on the same axle. tyre fitted wrong way around (5.2.3 (b))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Nearside Front Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

both headlamps dim

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Condensation in headlight

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear exhaust back box corroding

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Registration plate lamp not working (1.1.C.1d)

Offside Front position lamp(s) not working (1.1.A.3b)