2008 Vauxhall Vivaro

Horn not working (7.7 (a))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected jacking point (5.3.6 (a) (ii)) DANGEROUS

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front jacking point corroded but structural integrity unaffected

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front jacking point corroded but structural integrity unaffected

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a))

Offside Headlamp aim too high (4.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Coolant leak ()

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Oil leak ()

Nearside Front Seat belt flexible stalk damaged but not likely to lead to failure under load (5.2.4a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Seat belt flexible stalk damaged but not likely to lead to failure under load (5.2.4a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front handbrake cable corroded

Horn not working (1.6.2a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Fuel cap/sealing device missing (7.2.4a)

Nearside Headlamp aim too high (1.8)