2018 Lexmoto Zsx

Chain guard missing ()

Drive chain slightly tight (6.1.7 (k) (i))

Drive chain sprocket worn, but not excessively both (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Tyre worn close to the legal limit 90/90/17 cst (5.2.3 (e))

Headlamp light intensity reduced (4.1.4 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

brake linked system has been disconnected working independently

play in gear lever pivots

rear suspension has reduced damping .

Chain guard missing ()

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Headlamp light intensity reduced (4.1.4 (a))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

linked brake system has been disconnected so both brakes work independently now !!!!

play in gear lever pivots

rear suspension has slightly reduced damping

Front Brake excessively binding (1.2.1 (f))

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Chain guard missing ()

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

play in gear lever pivots

Chain guard missing ()

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Headlamp aim too low (4.1.2 (a))

Rear Tyre is unsuitable rotation wrong way (5.2.3 (a))

Chain guard missing ()

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain worn but not considered excessive has some tight spots in it (6.1.7 (c) (i))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))