MOT Status
ExpiredMileage
60,586 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear fog lamp not working (1.3.2b)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
Brake pipe inadequately clipped (3.6.B.1)
Electrical wiring insecure (1.9.2a)
Nearside Front Upper Front suspension locking device ineffective (2.5.A.4)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Lower Front suspension locking device ineffective (2.5.A.4)
Offside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Upper Front suspension locking device ineffective (2.5.A.4)
Offside Registration plate lamp shows direct white light to the rear (1.1.C.1f)
Horn not working (1.6.2a)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear Radius arm has excessive play in a pin/bearing (2.4.G.2)
Nearside Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Shock absorber insecure (2.7.2b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear fog lamp not working (1.3.2b)
Rear fog lamp tell tale not working (1.3.1b)
Registration plate lamp not working (1.1.C.1d)
Speedometer cannot be illuminated. (6.7.3)
os front floor under side untidy loads of welding done but appears to be sound and welded from inside
Nearside Front Direction indicator not working (1.4.A.2c)
os front floor under side untidy loads of welding done but appears to be sound and welded from inside
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
extensive welding done to under side plates comming adrift on os front floor but apear to be sound above plate
Front Exhaust system not adequately supported (7.1.1)
Offside Front wheel bearing has excessive play (2.5.A.3c)
Nearside Front suspension has slight play in an outer ball joint (2.5.B.2a)
Offside Front wheel bearing has slight play (2.5.A.3c)
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Rear Stop lamp not working (1.2.1b)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
genral condition of vehichle very corroded areas have been badly repaired floor very thin in places
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)
Nearside rear brake binding (3.7.B.1)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Registration plate lamp not working (1.1.5c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Stop lamp not working (1.2.1b)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
genral condition of vehichle very corroded areas have been badly repaired floor very thin in places
Nearside Inner Seat belt anchorage prescribed area is inadequately repaired (5.2.6)
Nearside Rear Radius arm has excessive play in a pin/bearing (2.4.G.2)
Nearside Rear rear brake binding (3.7.B.1)
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front wheel bearing has excessive play (2.5.A.3c)
Offside Rear Rear fog lamp not working (1.3.2b)
Offside Rear Registration plate lamp not working (1.1.5c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
All position lamps not working (1.1.A.3b)
Brakes imbalanced across an axle (3.7.B.5b)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Nearside Rear Direction indicator not working (1.4.A.2c)
Nearside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Registration plate lamp not working (1.1.5c)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Rear fog lamp not working (1.3.2b)
Offside Rear Registration plate lamp not working (1.1.5c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b)
Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Offside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)
Offside Outer Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Nearside Outer Front Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Steering rack gaiter split (2.2.D.2d)
Offside Outer Front Front constant velocity joint is insecure (2.5.C.1b)
Offside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear Radius arm has slight play in a pin bearing (2.4.G.2)
Offside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Front Front constant velocity joint gaiter split (2.5.C.1a)
Offside Rear Registration plate lamp not working (1.1.5c)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
How Reliable is the Austin Morris Mini 95L?
Based on 3,106 MOT tests across 414 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AFL 406Y is a 1982 Austin Morris Mini 95L in Red with a 998cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 48.1%.
Across all 1982 Austin Morris Mini 95L models, the average MOT pass rate is 72.1% with a typical mileage of 57,004 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Austin Morris Mini 95L fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 193 recorded failures. If you're considering buying AFL 406Y, it's worth having these areas checked by a mechanic before committing.
The Austin Morris Mini 95L typically stays on UK roads for around 46 years. At 44 years old, this Austin Morris Mini 95L is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AFL 406Y?
You can check the full history of AFL 406Y by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AFL 406Y registered?
AFL 406Y is a 1982 Austin Morris Mini 95L, first registered on 3 August 1982.
Is AFL 406Y safe to buy?
The MOT history for AFL 406Y shows 27 tests with a 48.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AFL 406Y have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AFL 406Y. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.