2001 Ford Fiesta

Nearside Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp are incorrectly positioned fixing bracket broken. (4.1.4 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch. (7.1.1 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area. (5.3.6 (a) (i))

Nearside Outer Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outer sill. (6.2.2 (d) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases middle section. (6.1.2 (a))

Hydraulic leak, but not excessive power steering leak. (8.4.1 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush. (5.3.4 (a) (i))

Nearside Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush. (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch. (5.3.6 (a) (i))

Power steering fluid reservoir low.

Power steering pipe/hose has slight seepage (2.1.5 (a))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive arch (5.2.6)

Power steering component(s) has slight seepage from a component pressure switch (2.3.3b)

coolant leak

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded arch (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive arch (5.2.6)

Power steering component(s) has slight seepage from a component pressure switch (2.3.3b)

coolant leak

Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded Inner sill. (5.2.6)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill panel. (2.4.A.3)

Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

corrosion offside rear arch

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

corrosion offside rear arch

exhaust heat shield loose

Nail in rear tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Centre Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Nail in rear tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Side repeater not working (1.4.A.2c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)