2002 Ford Ka

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Power steering component(s) has slight seepage from a component (2.3.3b)

Horn not working (1.6.2a)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Power steering component(s) has slight seepage from a component (2.3.3b)

Coolant leak

gearbox oil leak

n/s/r inner wheel arch slight corrosion

o/s + n/s sills slight corrosion

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Steering locking device missing (2.2.C.1g)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Front Brake hose seriously damaged (found during steering lock to lock check) (2.2.D.2b)

Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Steering locking device missing (2.2.C.1g)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Rear coil spring broken (2.4.C.1a)

Service brake: efficiency below requirements (3.7.B.7)

Coolant leak

engine cooling fan disconneted

gearbox oil leak

n/s/r inner wheel arch slight corrosion

o/s + n/s sills slight corrosion

Nearside Front Headlamp aim too high (1.8)

Nearside Inner Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Headlamp aim too low (1.8)

Power steering ram(s) has slight seepage from a seal (2.3.3b)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Inner Front Brake pad(s) wearing thin (3.5.1g)

Power steering ram(s) has slight seepage from a seal (2.3.3b)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake hose excessively chafed (3.6.B.4d)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Power steering component(s) leaking from a failed seal (2.3.3b)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear coil spring incomplete (2.4.C.1a)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.5c)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Ball joint has slight play (2.2.B.1f)