2003 Peugeot 206

Engine covers fitted

Nearside Front chassis corroded

Emissions not tested due to exhaust condition (7.4.B.1)

Exhaust system not adequately supported centre pipe broken from rear section (7.1.1)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement front bush (2.4.G.2)

Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside front brake excessively fluctuating (3.7.B.3)

Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside front brake excessively fluctuating (3.7.B.3)

Engine covers fitted

Front brake disc worn, pitted or scored, but not seriously weakened pitted on inner faces (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Nearside Front chassis corroded

Offside Track rod end ball joint has slight play (2.2.B.1f)

Engine covers fitted obscuring some components in the engine bay

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Play in steering rack inner joint(s)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Engine covers fitted obscuring some components in the engine bay

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Play in steering rack inner joint(s)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)

coil spring corroded (2.4.C.1b)

o/s front tyre wearing inner edge

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear fog lamp not working (1.3.2b)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)

coil spring corroded (2.4.C.1b)

o/s front tyre wearing inner edge

both rear tyre side walls cracking

nsf & osf tyres low on inner edges

nsr tyre sidewall/tread cracking

Offside Front Headlamp adversely affected by the operation of another lamp (1.7.5c)

Rear fog lamp not working (1.3.2b)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

both front tyres wearing outer edges both rears cracking

Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)