2004 Fiat Stilo

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sills floor also front susp arms (6.1.1 (c) (i))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Rear Seat belt retracting mechanism defective centre (7.1.2 (e))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sills floor also front susp arms (6.1.1 (c) (i))

Indicator switch faulty (1.4.A.1)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Centre Rear Seat belt retracting mechanism defective (5.2.5b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside rear brake binding (3.7.B.1)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

rear brake application uneven (3.7.B.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front coil spring fractured (2.4.C.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear registration plate deteriorated (6.3.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Headlamp aim too high (1.8)

Offside Front Headlamp aim too high (1.8)

Offside Front coil spring fractured (2.4.C.1a)

Offside Rear Front position lamp(s) not working (1.1.A.3b)

Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)