2007 Ford Focus

Nearside Front wing covered with tape

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Suspension component corroded but not seriously weakened front & rear (5.3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

both sides rear inner sills slightly corroded

Bonnet primary retaining device slightly deteriorated (3.1 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill area (5.3.6 (a) (i))

Parking brake has limited reserve travel

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Bonnet primary retaining device slightly deteriorated (3.1 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill area (5.3.6 (a) (i))

Parking brake has limited reserve travel

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Bonnet primary retaining device slightly deteriorated (3.1 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive Sill Area (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Tread Area (5.2.3 (d) (i))

Bonnet primary retaining device slightly deteriorated (3.1 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened Inneer Swept Area Corroding (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive Sill Area (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Bonnet primary retaining device slightly deteriorated (3.1 (c))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive Sill Area (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Bonnet primary retaining device slightly deteriorated (3.1 (c))

Exhaust Heat Shield Insecure

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive Sill Area (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Bonnet primary retaining device slightly deteriorated (3.1 (c))

Exhaust Heat Shield Insecure

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Bonnet primary retaining device slightly deteriorated (3.1 (c))

Exhaust Heat Shield Insecure

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Bonnet primary retaining device slightly deteriorated (3.1 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Radius Arm (5.3.4 (a) (i))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Front of Trailing Arm (5.3.4 (a) (i))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Radius Arm (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Lower Suspension arm pin or bush excessively worn Front of Trailing arm (5.3.4 (a) (i))

Bonnet primary retaining device slightly deteriorated (3.1 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Radius Arm (5.3.4 (a) (i))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Front of Trailing Arm (5.3.4 (a) (i))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Radius Arm (5.3.4 (a) (i))

bonnet catch faulty

n/s/f and o/s/f tyres have no tread on inner edges advise changing

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

bonnet catch faulty

n/s/f and o/s/f tyres have no tread on inner edges advise changing

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

1.slight damage to windscreen

2.both front tyres wearing low on edges

3.plastic sill covers fitted at time of test

4.off side rear tyre near legal limits

slight damage to windscreen

both front tyres wearing low on inside edges

front brake pads wearing low

1.plastic sill covers fitted at time of test 2.slight damage to windscreen

Items removed from driver's view prior to test

Slight damage to front windscreen.

Under sides of sills not fully inspected as plastic sill covers fitted.

As per failure.

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

1. Unable to inspect outer sills fully due to plastic sill covers. 2. Offside front tyre wearing low on inner edge.

slight uneven tread wear on near side rear tyre