2007 Fiat Bravo

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

park brake has little reserve travel and just meets performance requirements, adjustment of the system is advised

welding repairs to o/s sill and front sub frame, covered using under seal

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Sub-frame corroded and seriously weakened marked using green paint (5.3.3 (b) (i))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s sill (6.1.1 (c) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

park brake has little reserve travel and just meets performance requirements, adjustment of the system is advised

Exhaust emissions exceed manufacturer's specified limit Plate limit = 1.04 (8.2.2.2 (a))

Front Lower Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Lower Gearbox mounting defective ()

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Driver's door hinge deteriorated but the door can still be readily opened and closed (6.2.3 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust heat shield insecure

Rear Exhaust mounting defective (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement all (5.3.4 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Suspension arm pin or bush worn but not resulting in excessive movement all (5.3.4 (a) (i))

Nearside Rear Lower Gearbox mounting defective ()

engine covers fitted obscuring some engine bay components

under trays fitted obscuring some underside components

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)