MOT Status
ExpiredMileage
101,525 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Tyre worn close to the legal limit both (4.1.E.1)
Damage to rear boot floor/structure
Front Headlamp deteriorated but light output not reduced (1.7.5a)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front tyres wearing on inner edge
N/S & O/S/R wheel arches are corroded/Repair advised
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
O/S inner sill corroded
O/S/F floor pan/inner wheel arch corroded
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Brake pipe slightly corroded (3.6.B.2c)
Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both rear wheel arches corroded
difficult to be sure of quality of welding repairs
plastic sill covers fitted
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Brake pipe slightly corroded (3.6.B.2c)
Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both rear wheel arches corroded
plastic sill covers fitted
Child seat fitted not allowing full inspection of adult belt
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both rear wheel arches corroded
difficult to be sure of quality of welding repairs due to location & application of sealant
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Child seat fitted not allowing full inspection of adult belt
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both rear wheel arches corroded
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp aim too high and too far to the right. (1.8)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
nearside front tyre perished ADVISE REPLACED
nearside front wheel binding slightly
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
nearside front tyre perished ADVISE REPLACED
nearside front wheel binding slightly
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front brake disc slightly pitted (3.5.1h)
front brake juddering slightly (3.7.A.2b)
Front brake disc slightly pitted (3.5.1h)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
plastic sill covers fitted
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front brake disc slightly pitted (3.5.1h)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AG52 BZD is a 2003 Mazda 323 in Red with a 1,991cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 80%.
Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying AG52 BZD, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AG52 BZD?
You can check the full history of AG52 BZD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AG52 BZD registered?
AG52 BZD is a 2003 Mazda 323, first registered on 15 February 2003.
Is AG52 BZD safe to buy?
The MOT history for AG52 BZD shows 15 tests with a 80% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AG52 BZD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AG52 BZD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.