MOT Status
ExpiredMileage
113,869 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Headlamp not working on main beam (1.7.5a)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake lever has no reserve travel (3.1.6b)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Temporary fuel cap fitted
Trailing arm has slight play in a pin/bush (2.4.G.2)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
n/s/f tyre in poor condition
rear boot floor coroded
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Headlamp not working on main beam (1.7.5a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Headlamp not working on main beam (1.7.5a)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Front position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Vehicle structure has slight corrosion (6.1.B.2)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front coil spring fractured (2.4.C.1a)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Upper Shock absorber has an excessively worn shock absorber pivot (2.7.4)
Nearside Headlamp aim not tested (1.8.A.1c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Upper Shock absorber has an excessively worn shock absorber pivot (2.7.4)
Offside Rear Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Headlamp aim too low (1.8)
Offside Front Headlamp aim too low (1.8)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AG52 CSF is a 2003 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying AG52 CSF, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AG52 CSF?
You can check the full history of AG52 CSF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AG52 CSF registered?
AG52 CSF is a 2003 Ford Ka, first registered on 28 February 2003.
Is AG52 CSF safe to buy?
The MOT history for AG52 CSF shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AG52 CSF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AG52 CSF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.