2003 Fiat Punto

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

floor corroded

inner sills corroded

nearside front wheel damaged

inner sills corroded

nearside front wheel damaged

floor corroded

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Registration plate lamp not working (1.1.C.1d)

Nail in nearside rear tyre

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Vehicle's internal headlight adjuster altered to recheck lights

chassis corroding both sides

front floor corroded both sides

fueltank straps corroding

hand brake has a long travel

inner rear arch corroding fuel filler neck brackett

inner sills corroding both sides

rear suspension components corroding

wheeltrims fitted hub components not fully checked

Nearside Headlamp aim too low (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too low (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nail in nearside rear tyre

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Vehicle's internal headlight adjuster altered to recheck lights

chassis corroding both sides

front floor corroded both sides

fueltank straps corroding

hand brake has a long travel

inner rear arch corroding fuel filler neck brackett

inner sills corroding both sides

rear suspension components corroding

wheeltrims fitted hub components not fully checked

Both rear chassis legs starting to corrode!

Both rear coil springs corroded!

Centre to rear exhaust joint blowin'

Floor pans starting to corrode around sills

Fuel filler neck bracket / holder! wheel arch corroded (heavy)

Hand brake travel high!

Near side rear tyre worn ON LIMIT! an heavy on edges (tread not cut as deep tho')

Nearside Headlamp aim too high (1.8)

Off side rear tyre worn on edges! (tread not cut as deep tho)

Offside Headlamp aim too high (1.8)

Oil leaks

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Both rear chassis legs starting to corrode!

Both rear coil springs corroded!

Centre to rear exhaust joint blowin'

Floor pans starting to corrode around sills

Fuel filler neck bracket / holder! wheel arch corroded (heavy)

Hand brake travel high!

Near side rear tyre worn ON LIMIT! an heavy on edges (tread not cut as deep tho')

Off side rear tyre worn on edges! (tread not cut as deep tho)

Oil leaks

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Oil leak

corrision underside of vechile

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Oil leak

corrision underside of vechile

corrosion to offside inner sill and rear floor pan both sides

front brake pads worn low

both rear brake hose ferrules corroded

rear exhaust rubber mounting perished/splitting

unable to fully inspect brake pipes due to heatshields fitted

windscreen washer bottle leaking

Nail in nearside rear tyre

Oil leak

both front wiper blades splitting

oil sump corroded

slight bulge in nearside front tyre,outer sidewall

slight bulge in nearside rear tyre,outer sidewall

small leak from centre/rear exhaust joint

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

O/S/R TYRE @ 2MM {JUST LEGAL}