2008 Volvo V50

Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Windscreen wiper not working (3.4 (a))

Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Offside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Lower Passenger's seat insecure Bolts Missing (6.2.6 (a) (ii)) DANGEROUS

Offside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Inner Tyre worn close to legal limit/worn on edge All Tyre's x4 (5.2.3 (e))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Inner Tyre worn close to legal limit/worn on edge All Tyre's x4 (5.2.3 (e))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Drive shaft support bearing slightly noisy.

Nearside Front Lower Suspension arm pin or bush excessively worn Rear (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn Rear (5.3.4 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Drive shaft support bearing slightly noisy.

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front position lamp(s) not working (1.1.A.3b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear brake fluctuating, but not excessively (3.7.B.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear brake fluctuating, but not excessively (3.7.B.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)