1981 Ford Capri

Nearside Rear inner arch ,sill and floor

Offside Rear arch, sill and floor corroded

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear sill and wheel arch corroded

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Ball joint has excessive play (2.2.B.1f)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Offside Front Steering rack gaiter split (2.2.D.2d)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Shock absorber has slight corrosion to the casing both (2.7.2a)

exhaust system slightly deteriated

fuel pipes corroded

o/s front wing slightly corroded

o/s rear wheel arch slightly corroded

under side slightly corroded

Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (1.1.C.1a)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear part of floor at front mount of rear spring corroded (6.1.B.2)

Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Spring mount at rear chassis corroded (6.1.B.2)

Offside Front Floor at drivers feet corroded

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area modified, but not inappropriately (2.4.A.3)

un der body corroded but not structual

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area modified, but not inappropriately (2.4.A.3)

un der body corroded but not structual

Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Rear Body has a projection caused by corrosion (6.1.C.1)

both front brake discs corroded

offside front wing and valance corroded (no sharp edges at time of test)

offside rear brake binding slighty

rear valance and rear bumper corroded

brake disc slightly pitted (3.5.1h)

Brake pedal has insufficient reserve movement (3.3.A.5)

Brake pipe excessively corroded (3.6.B.2c)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Service brake: efficiency below requirements (3.7.B.7)

Offside Front Braking system leaking (3.6.A.1) DANGEROUS

brake disc slightly pitted (3.5.1h)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Offside rear brake binding (3.7.B.1)

Windscreen wiper not operating automatically when switched on (8.2.1b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake binding (3.7.B.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp tell tale not working (1.3.1b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Rear Brake hose bulging under pressure (3.6.B.3)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)