2003 Ford Focus

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Nearside Brake pipe excessively corroded rear of front to rear (1.1.11 (c))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded Rear of front to rear (3.6.B.2c)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front Brakes imbalanced across an axle Axle 1 (3.7.B.5b)

Front brake disc in such a condition that it is seriously weakened Inner face of discs (3.5.1i)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded Rear of front to rear (3.6.B.2c)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

brake pipes covered by paint

fuel system corroded

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Brake cable has restricted free movement handbrake (3.5.1k)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Brake cable has restricted free movement handbrake (3.5.1k)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front discs corroded

Rear discs corroded

Nearside rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Front Tyre worn close to the legal limit (4.1.E.1)

the exhaust box outer skin is rusting slightly

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Headlamp aim too high (1.8)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

both front tyres wearing on inner edge