MOT Status
ExpiredMileage
154,456 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar linkage has slight play in a pin bearing (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar linkage has slight play in a pin bearing (2.4.G.2)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Direction indicators not working (1.4.A.2c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
slight in balance on rear brake readings
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance (1.2.1d)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
slight in balance on rear brake readings
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
auxillery belt perished
Centre Stop lamp not working (1.2.1b)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Stop lamp not working (1.2.1b)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Stop lamp not working (1.2.1b)
Offside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
auxillery belt perished
Child seat fitted not allowing full inspection of adult belt
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Steering column top bearing slightly worn (2.1.2c)
auxillery belt deteriorated
offside rear tyre worn bald on inner edge
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Seat belt has a cut which has significantly weakened the webbing (5.2.2a)
Offside Stop lamp not working (1.2.1b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
n/s mirror cracked
Headlamp aim too low (1.8)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear position lamp(s) not working (1.1.A.3b)
n/s mirror cracked
front brake discs worn
Nearside Rear coil spring incomplete (2.4.C.1a)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
front brake discs worn
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
How Reliable is the Seat Alhambra?
Based on 690,916 MOT tests across 54,940 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AJ03 MZP is a 2003 Seat Alhambra in Silver with a 1,896cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2003 Seat Alhambra models, the average MOT pass rate is 68.8% with a typical mileage of 104,360 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Seat Alhambra fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 23,231 recorded failures. If you're considering buying AJ03 MZP, it's worth having these areas checked by a mechanic before committing.
The Seat Alhambra typically stays on UK roads for around 30 years. At 23 years old, this Seat Alhambra is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AJ03 MZP?
You can check the full history of AJ03 MZP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AJ03 MZP registered?
AJ03 MZP is a 2003 Seat Alhambra, first registered on 3 July 2003.
Is AJ03 MZP safe to buy?
The MOT history for AJ03 MZP shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AJ03 MZP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AJ03 MZP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.