MOT Status
ExpiredMileage
99,779 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear tyre perished from the inside wall
Rear Brake pad(s) wearing thin both sides (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)
under vehicle rusty
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear tyre perished from the inside wall
Rear Brake pad(s) wearing thin both sides (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)
under vehicle rusty
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Tyre tread depth below requirements of 1.6mm bald on inner edge (4.1.E.1)
Nearside Front Valve stem seriously damaged badly split/perished (4.1.D.1e)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm bald on inner edge (4.1.E.1)
Offside Front Valve stem seriously damaged badly split/perished (4.1.D.1e)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Headlamp levelling device obviously defective (1.7.2)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Lower Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit 3mm on inner edge & badly mis-shaped (4.1.E.1)
Offside Rear Lower Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit 3mm (4.1.E.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear brake disc worn, pitted or scored, but not seriously weakened both o/s & n/s (3.5.1i)
vehicles underside covered in various stages of light corrosion
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Direction indicator missing (1.4.A.2b)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp missing (1.7.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear coil spring broken (2.4.C.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Headlamp aim too high (1.8)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Headlamp aim too high (1.8)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
getting very dry/rusty underneath
sill covers fitted
small cuts in offside rear tyre tread
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
getting very dry/rusty underneath
sill covers fitted
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
front and rear discs surface rusted
Nearside Inner Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AJ04 NBZ is a 2004 Mazda 3 in Silver with a 1,999cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.
Across all 2004 Mazda 3 models, the average MOT pass rate is 73.9% with a typical mileage of 69,720 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying AJ04 NBZ, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 22 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AJ04 NBZ?
You can check the full history of AJ04 NBZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AJ04 NBZ registered?
AJ04 NBZ is a 2004 Mazda 3, first registered on 31 March 2004.
Is AJ04 NBZ safe to buy?
The MOT history for AJ04 NBZ shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AJ04 NBZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AJ04 NBZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.