2004 Mazda 6

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arches (6.2.2 (d) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

under body corrosion

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arches (6.2.2 (d) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

under body corrosion

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Lower Steering linkage ball joint has excessive play both ball joints (2.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill not welded to outer sill (5.3.6 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Suspension arm ball joint excessively worn Both Front and rear ball joints (5.3.4 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear parking (secondary) brake grabbing severely (3.7.B.6b)

Parking brake lever has no reserve travel (3.1.6b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit 2mm (4.1.E.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement all rear suspension bushes (2.4.G.2)

o/s exhaust mount broken system still supported

underside of vehicle showing signs of corrosion

Nearside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit 2mm (4.1.E.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement all rear suspension bushes (2.4.G.2)

auxiliary belt area noisy whilst under load

o/s exhaust mount broken system still supported

o/s/r brake slightly binding

underside of vehicle showing signs of corrosion

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

front inner pads worn low,inner face of discs corroded.

n/s/r tyre worn to 3mm centre,1mm on edge.

Offside Front Front position lamp(s) not working (1.1.A.3b)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front inner pads worn low,inner face of discs corroded.

n/s/r tyre worn to 3mm centre,1mm on edge.

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Outer Front Tyre worn close to the legal limit (4.1.E.1)