MOT Status
ValidMileage
124,910 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Coil spring corroded (5.3.1 (b) (i))
under body corrosion
both side step are rusty
Nearside Rear Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced engine bay (6.1.1 (c) (i))
side steps rusty
under body corrosion
Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))
Nearside Front Suspension arm ball joint dust cover severely deteriorated bottow (5.3.4 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated top (5.3.4 (b) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Tyre worn close to legal limit/worn on edge worn on edge all for (5.2.3 (e))
Brake master cylinder/servo mounting repair covered in underseal (1.1.21 (e) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Suspension spring mounting repair covered in underseal multiple throughout vehicle (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Nearside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Brake master cylinder/servo mounting repair covered in underseal (1.1.21 (e) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Suspension spring mounting repair covered in underseal multiple throughout vehicle (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and outer sills (5.3.6 (a) (i))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and outer sills (5.3.6 (a) (i))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Offside Front bump stop missing
Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
cant fully inspect sills as plastic covers fitted
Emissions not tested (8.2.2.2 (e))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
cant fully inspect sills as plastic covers fitted
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear body both sides has slight corrosion
Nearside Rear Body has slight corrosion (6.1.B.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Offside Rear Body has slight corrosion (6.1.B.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Body has slight corrosion (6.1.B.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Offside Rear Body has slight corrosion (6.1.B.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Wheel nut(s) missing (4.2.A.1e)
Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Parking brake: efficiency below requirements (3.7.C.1b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front Headlamp aim too high (1.8)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Headlamp aim too high (1.8)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Nearside Front Headlamp aim too high (1.8)
Offside Front Headlamp aim too high (1.8)
Offside Front front brake binding (3.7.B.1)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front coil spring broken (2.4.C.1a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake lever has little reserve travel (3.1.6b)
How Reliable is the Mitsubishi Shogun?
Based on 1,312,716 MOT tests across 114,900 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AJ05 EUP is a 2005 Mitsubishi Shogun in Silver with a 3,200cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 66.7%.
Across all 2005 Mitsubishi Shogun models, the average MOT pass rate is 73.6% with a typical mileage of 98,232 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi Shogun fails its MOT is brake pipe excessively corroded, accounting for 75,153 recorded failures. If you're considering buying AJ05 EUP, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Shogun typically stays on UK roads for around 37 years. At 21 years old, this Mitsubishi Shogun is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AJ05 EUP?
You can check the full history of AJ05 EUP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AJ05 EUP registered?
AJ05 EUP is a 2005 Mitsubishi Shogun, first registered on 29 June 2005.
Is AJ05 EUP safe to buy?
The MOT history for AJ05 EUP shows 24 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AJ05 EUP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AJ05 EUP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.