2007 Mazda MX-5

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Service brake binding but not excessively both rear (1.2.1 (f))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Front Registration plate incorrect (0.1 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Rear Registration plate incorrect (0.1 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake fluid warning lamp illuminated (1.1.10 (f))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Service brake binding but not excessively both rear (1.2.1 (f))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

rear suspension components corroding

some underbody rust

Headlamp not working on dipped beam both (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

rear suspension components corroding

some underbody rust

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Rear Suspension component mounting prescribed area is corroded but not considered excessive end of outer sill box section under car.Both sides (5.3.6 (a) (i))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Front Tyre slightly damaged/cracking or perishing both front tyres are very perished 2054517 88W (5.2.3 (d) (ii))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords several cuts (5.2.3 (d) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive end of outer sill box section under car.Both sides (5.3.6 (a) (i))

Nearside Front slight brake bind

Front Tyre slightly damaged/cracking or perishing both front tyres are perished (5.2.3 (d) (ii))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair out of balance 29% (1.2.1 (c))

Rear end of outer sill box sections are corroded

Front Tyre slightly damaged/cracking or perishing both are starting to perish (5.2.3 (d) (ii))

Nearside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

rear discs corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Inner Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

front wiper blades split

offside front brfake disc inner face corroded

Front registration plate has a feature which changes the appearance or legibility of the characters (6.3.4c)

Rear registration plate has a feature which changes the appearance or legibility of the characters (6.3.4c)

Nearside Front Anti-roll bar linkage fractured (2.4.G.1)