2007 Volkswagen Eos

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Discs rusty

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Central Lower Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Engine & Under-tray(s) fitted obscuring some components

Front Drive shaft joint constant velocity boot severely deteriorated NEARSIDE & OFFSIDE (6.1.7 (g) (i))

Front Lower Suspension arm ball joint has slight play NEARSIDE & OFFSIDE (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Registration plate deteriorated but not likely to be misread FRONT & REAR (0.1 (b))

Central Lower Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Engine & Under-tray(s) fitted obscuring some components

Front Drive shaft joint constant velocity boot severely deteriorated NEARSIDE & OFFSIDE (6.1.7 (g) (i))

Front Lower Suspension arm ball joint has slight play NEARSIDE & OFFSIDE (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Registration plate deteriorated but not likely to be misread FRONT & REAR (0.1 (b))

Registration plate incorrect FRONT & REAR (0.1 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

osr tyre has signs of runflat damge inner sidewall

osr tyre has temporary repair

sign of battery acid at base of battery

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

osr tyre has signs of runflat damge inner sidewall

osr tyre has temporary repair

sign of battery acid at base of battery

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Direction indicator has light sources not illuminating, but not more than 50% (1.4.A.2c)

Nearside Front coil spring broken (2.4.C.1a)

Offside Front Upper Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Direction indicator has light sources not illuminating, but not more than 50% (1.4.A.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)