2012 Ford Mondeo

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Both trailing arm bushes (5.3.4 (a) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Both trailing arm bushes (5.3.4 (a) (i))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split (6.1.7 (g) (ii))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge Nearside and offside wear on edges (5.2.3 (e))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Tyre worn close to legal limit/worn on edge Nearside and offside wear on edges (5.2.3 (e))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Tread 2-3mm tyre and wearing on inner edge, 215/50 ZR17 95w (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge tyre wearing on inner edge and cracking. (5.2.3 (e))

Rear Tyre worn close to legal limit/worn on edge Nearside and offside (5.2.3 (e))

Front Brake pad(s) wearing thin 3mm (minimum 1.5mm) (3.5.1g)

Front Tyre worn close to the legal limit Nearside and offside (4.1.E.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin 3mm (minimum 1.5mm) (3.5.1g)

Front Tyre worn close to the legal limit Nearside and offside (4.1.E.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)