2016 Yamaha Mt

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake excessively binding (1.2.1 (f))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) DANGEROUS

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Exhaust noisy (8.1.1 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Exhaust noisy (8.1.1 (a))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Front Steering linkage locking device ineffective (2.1.3 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Offside Front Direction indicator lens defective which has no effect on emitted light Lens missing (4.4.1 (b) (i))

Front Brake pad(s) contaminated (1.1.13 (b))

Nearside Front Shock absorber has a serious fluid leak Fork stanchion (5.3.2 (b))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Headlamp aim too low (4.1.2 (a))

Offside Front Direction indicator lens defective which has no effect on emitted light Lens missing (4.4.1 (b) (i))