2001 Peugeot 206

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front All direction indicators slightly discoloured (4.4.3 (a))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Headlamp aim too high (4.1.2 (a))

Front All direction indicators slightly discoloured (4.4.3 (a))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Slight play in anti roll bar links

Brake pipe excessively corroded Front to rear (as marked) (1.1.11 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Seat belt missing Rear unable to test due to vehicle load (7.1.2 (a))

2X rear metal brake pipes from compensator valve corroded

Offside Front Brake hose ferrule corroded

Slight play in anti roll bar links

Brake load sensing valve stiff (3.6.E.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Oil leak ()

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Brake load sensing valve linkage stiff (3.6.E.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside rear brake fluctuating, but not excessively (3.7.B.3)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Oil leak ()

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Brake load sensing valve stiff (3.6.E.3)

Engine covers fitted obscuring some components in the engine bay

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Items removed from driver's view prior to test

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Oil leak

Play in steering rack inner joint(s)

Under-trays fitted obscuring some underside components

front brake fluctuating, but not excessively (3.7.B.3)

Engine covers fitted obscuring some components in the engine bay

Exhaust has a minor leak of exhaust gases (7.1.2)

Nail in offside rear tyre

Nearside rear brake fluctuating, but not excessively (3.7.B.3)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Parking brake lever has little reserve travel (3.1.6b)

Passenger seat(s) missing at time of test

Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Oil leak

Play in steering rack inner joint(s)

Under-trays fitted obscuring some underside components

Brake load sensing valve linkage stiff (3.6.E.3)

Nail in offside rear tyre

Offside Front Shock absorber has a light misting of oil (2.7.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Steering rack gaiter insecure (2.2.D.2d)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)