MOT Status
ExpiredMileage
89,518 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake load sensing valve stiff (1.1.17 (c) (ii))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced both sides chassis/jacking points (6.1.1 (c) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Brake load sensing valve stiff (1.1.17 (c) (ii))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced both sides chassis/jacking points (6.1.1 (c) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both front (2.4.G.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve linkage seized (3.6.E.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Front Brake pipe excessively corroded to rear (3.6.B.2c)
Nearside Front Valve stem seriously misaligned (4.1.D.1e)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Brake pipe excessively corroded (3.6.B.2c)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Registration plate lamp not working (1.1.C.1d)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Headlamp aim too high (1.8)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim too high (1.8)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Offside Rear Direction indicator incorrect colour (1.4.A.2f)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
rear brake application uneven (3.7.B.2)
Brake pad(s) wearing thin (3.5.1g)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too high (1.8)
Offside Stop lamp not working (1.2.1b)
Nearside Headlamp aim too high (1.8)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Tyres worn on edge (Tracking)
Nearside Front Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)
(1)Both bottom arm bushes splitting †(2)O/S/R wheel arch trim insecure
Rear Rear fog lamp emits a light other than red (1.3.2e)
unable to see inner pads
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AJ52 FWO is a 2003 Peugeot 206 in Black with a 1,124cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 56%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying AJ52 FWO, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AJ52 FWO?
You can check the full history of AJ52 FWO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AJ52 FWO registered?
AJ52 FWO is a 2003 Peugeot 206, first registered on 23 January 2003.
Is AJ52 FWO safe to buy?
The MOT history for AJ52 FWO shows 25 tests with a 56% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AJ52 FWO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AJ52 FWO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.