2002 Mazda 323

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill and wheel arch (6.2.2 (d) (i))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch and inner sill (6.2.2 (d) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch (6.2.2 (d) (i))

Nearside Front Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer and inner sills (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

engine malfunction indicator lamp on

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer and inner sills (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

engine malfunction indicator lamp on

Nearside Front Tyre worn close to legal limit/worn on edge devoid of tread on edges (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge devoid of tread on edges (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge devoid of tread on inner edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills (5.3.6 (a) (i))

engine malfunction indicator lamp on indicating a fault

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge devoid of tread on inner edge (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge devoid of tread on inner edge (5.2.3 (e))

engine MIL light on

rear brake pads not clearly visible - possibly wearing thin

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened nearside and offside (3.5.1i)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened nearside and offside (3.5.1i)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Outer Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit devoid of tread on edges (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened nearside and offside (3.5.1i)

nearside rear tyre out of shape

Nearside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded SILL & INNER WHEEL ARCH (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded SILL & INNER WHEEL ARCH (2.4.A.3)

NSR WHEEL BINDING VERY SLIGHTLY

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

NSR WHEEL BINDING VERY SLIGHTLY

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust has part of the system slightly deteriorated (7.1.1a)

General corrosion to underside

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre(s) incorrect because a lightweight or space saving wheel is fitted (4.1.A.1b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Nearside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Offside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Nearside Front brake disc excessively pitted (3.5.1h)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Offside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Nearside Front Headlamp aim too low (1.6.D2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp aim too low (1.6.D2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

nail in tyre