2012 Volvo S60

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge very badly worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge worn on edges slightly (5.2.3 (e))

Offside Front check strap broken

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 235 40 18 (5.2.3 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge worn on edges slightly (5.2.3 (e))

Offside Front check strap broken

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Dual mass rattle

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Check strap broken

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Dual mass rattle

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Check strap broken

Offside Front Tyre worn close to legal limit/worn on edge Worn in centre (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

covers fitted obscuring some components

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen washer provides insufficient washer liquid (8.2.3)

covers fitted obscuring some components

n/s/r tyre wear/nail in tread

unable to assess some areas due to covers

wipers smearing

Nearside Headlamp aim too high (1.8)

Offside Front Inner Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Headlamp aim too high (1.8)

n/s/f tyre ON limit

n/s/r tyre wear/nail in tread

unable to assess some areas due to covers

wipers smearing

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

emissions to clean to detect