2002 Ford Ka

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

both outer sills corroded

nearside front road wheel inner rim damaged

offside front tyre worn below 1.6mm on edges

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

both outer sills corroded

nearside front road wheel inner rim damaged

offside front tyre worn below 1.6mm on edges

free play in top strut mounts JUST contained within max limits

wear/deterioration to nearside front lower arm front inner mounting bush

wear/deteriroation to rear beam axle mounting bushes

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

outer sills weld repaired both sides surface corrosion

Both sills slightly rusty.

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Brake pedal has no servo assistance (3.3.B.2)

Brake pedal spongy (3.3.B.1b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Service brake: efficiency below requirements (3.7.B.7)

Offside Tyre worn close to the legal limit (4.1.E.1)

Front brake discs wearing thin

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear coil spring incomplete (2.4.C.1a)

Nearside Front Lower Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Offside Front Lower Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Nearside Front Radius arm has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)