MOT Status
ExpiredMileage
83,598 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Suspension arm has slight play in a pin/bush both (2.4.G.2)
Both front floors slightly corroded
N/S outer slightly corroded
O/S front chassis slightly corroded
O/S front chassis slightly corroded
Nearside Front Headlamp aim too low (1.8)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear (2.4.G.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded outter sill (5.2.6)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Headlamp aim too low (1.8)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Seat belt anchorage prescribed area is excessively corroded outter sill (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded outter sill (5.2.6)
Parking brake: efficiency below requirements (3.7.B.7)
Tyre has ply or cords exposed both rear (4.1.D.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
corrosion to underside vehicle & chassis
uneven wear to o/s/f tyre
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Body has slight corrosion (6.1.B.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Body has slight corrosion (6.1.B.2)
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Body has slight corrosion (6.1.B.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Body has slight corrosion (6.1.B.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AK03 ZZC is a 2003 Ford Ka in Green with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 70.6%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying AK03 ZZC, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AK03 ZZC?
You can check the full history of AK03 ZZC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AK03 ZZC registered?
AK03 ZZC is a 2003 Ford Ka, first registered on 11 April 2003.
Is AK03 ZZC safe to buy?
The MOT history for AK03 ZZC shows 17 tests with a 70.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AK03 ZZC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AK03 ZZC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.