MOT Status
ExpiredMileage
94,350 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake repair covered in underseal both front (1.1.21 (e) (i))
Coolant leak ()
Exhaust silencer slightly loose (8.1.1 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Offside Front Brake prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))
Suspension component mounting repair covered in underseal both front (5.3.6 (a) (i))
Tyre slightly damaged/cracking or perishing Both rear inner (5.2.3 (d) (ii))
Drive belt excessively worn (6.1.7 (c) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Rear fog lamp likely to become detached (4.5.1 (c) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Coolant leak ()
Exhaust silencer slightly loose (8.1.1 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Offside Front Brake prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))
Tyre slightly damaged/cracking or perishing Both rear inner (5.2.3 (d) (ii))
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Rear Nail in tyre ()
engine management light is on
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Stop lamp not working (1.2.1b)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Rear Nail in tyre ()
engine management light is on
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Both rear axle bushes perishing
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak
Parking brake lever has little reserve travel (3.1.6b)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Direction indicator not working (1.4.A.2c)
Offside Front Seat belt retracting mechanism defective (5.2.5b)
Both rear axle bushes perishing
EML light on
Fuel filter rusty
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front coil spring incomplete (2.4.C.1a)
Both rear tyres wearing uneven
Front Brake pad(s) wearing thin (3.5.1g)
Nearside rear tyre has cut to side wall
nearside wiper blade split
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Brake hose slightly chafed (3.6.B.4d)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake hose seriously damaged (found during steering lock to lock check) (2.2.D.2b) DANGEROUS
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AK03 ZZE is a 2003 Ford Ka in Blue with a 1,599cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 70%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying AK03 ZZE, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AK03 ZZE?
You can check the full history of AK03 ZZE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AK03 ZZE registered?
AK03 ZZE is a 2003 Ford Ka, first registered on 11 April 2003.
Is AK03 ZZE safe to buy?
The MOT history for AK03 ZZE shows 20 tests with a 70% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AK03 ZZE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AK03 ZZE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.