MOT Status
ExpiredMileage
87,458 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Front Exhaust emissions likely to be affected by an exhaust leak flexi pipe (8.2.1.1 (b))
Nearside Front Upper Macpherson strut pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush excessively worn trailing arm (5.3.4 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a))
Offside Rear Suspension arm pin or bush excessively worn trailing arm (5.3.4 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front passenger door catch deteriorated so the door cannot be readily opened or closed (6.2.3 (c) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
General corrosion to underside of vehicle
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear fog lamp not working (1.3.2b)
Windscreen washer provides insufficient washer liquid (8.2.3)
General corrosion to underside of vehicle
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner to outer sill joint (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail (2.4.A.3)
Offside Rear fog lamp not working (1.3.2b)
Rear fog lamp switch faulty (1.3.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Inner Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Brake actuating linkage mounting prescribed area is corroded but not considered excessive bulkhead (3.3.A.2)
Offside Front Inner Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis rail (2.4.A.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside front brake fluctuating, but not excessively (3.7.B.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded outter sill (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded floor pan (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside front brake fluctuating, but not excessively (3.7.B.3)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim not tested (1.8.A.1c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Macpherson strut slightly distorted (2.4.G.1)
Front brake disc slightly pitted (3.5.1h)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
slight pedal travel
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear coil spring fractured (2.4.C.1a)
Front Macpherson strut slightly distorted (2.4.G.1)
Front brake disc slightly pitted (3.5.1h)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
offside rear trye slightly out of shape
rear wiper blades split
slight pedal travel
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AK04 RXZ is a 2004 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 55%.
Across all 2004 Ford Ka models, the average MOT pass rate is 67.3% with a typical mileage of 45,689 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying AK04 RXZ, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 22 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AK04 RXZ?
You can check the full history of AK04 RXZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AK04 RXZ registered?
AK04 RXZ is a 2004 Ford Ka, first registered on 31 March 2004.
Is AK04 RXZ safe to buy?
The MOT history for AK04 RXZ shows 20 tests with a 55% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AK04 RXZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AK04 RXZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.