2005 Fiat Scudo

Horn not working (7.7 (a))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material main at front (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill at rear (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

both front fog lamps damaged and not working

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split (6.1.7 (g) (ii))

Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill complete (7.1.1 (a) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill complete (5.3.6 (a) (i))

Nearside Rear Suspension component pin or bush excessively worn trailing arm (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Suspension component pin or bush excessively worn trailing arm (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

both front fog lamps damaged and not working

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Fuel system component leaking (7.2.3)

Offside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt loose at large end (2.5.C.1a)

brake pedal rubber worn on edge

oil leak

Brakes imbalanced across an axle (3.7.B.5b)

Front suspension retaining device ineffective (2.5.A.4)

Indicator switch faulty (1.4.A.1)

Nearside Direction indicators incorrect colour (1.4.A.2f)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Headlamp insecure (1.7.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear brake application uneven (3.7.B.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp aim too low (1.8)

Offside Seat belt locking mechanism does not secure or release (5.2.5a)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

oil leak

Offside Front Headlamp aim too low (1.8)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Front Front position lamp(s) obviously incorrectly positioned (1.1.A.3a)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust system not adequately supported (7.1.1)

Registration plate lamp not working (1.1.C.1d)

Ball joint has slight play (2.2.B.1f)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Ball joint has slight play (2.2.B.1f)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

n/s wiper blade is beginning to split