2005 Ford Transit

Nearside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch by spring soft may go through with excessive force. (6.2.2 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge getting low (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Nearside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch by spring soft may go through with excessive force. (6.2.2 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge getting low (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rigger (5.3.6 (a) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Direction indicator adversely affected by the operation of another lamp light interaction (4.4.3 (b))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rigger (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

surface corrosion to various parts and components of under vehicle ok at time of test with cat tool but a heavier tool may make holes

Nearside Front Outer Vehicle structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i))

Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rail (6.1.1 (c) (i))

Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rail (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced suspension area (6.1.1 (c) (i))

Nearside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front inner wheel arch is slightly corroded

o/s rear light is cracked

Offside Front engine mounting bracket fractured but not likely to fail (6.1.D.1b)

n/s front door step outer sill is corroded

n/s front sill is corroded

n/s rear bump step is corroded

o/s front sill is corroded

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Outer Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)