2005 Ford Focus C-max

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Exhaust emissions likely to be affected by an exhaust leak Blowing at front flexi joint (8.2.1.1 (b))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Lower wing corroded (6.1.1 (c) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a minor leak of exhaust gases front flexi (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

both front to rear sills showing signs of corrosion

underside of vehicle showing signs of corrosion front and rear

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front wing rotted but not structural

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Body has slight corrosion (6.1.B.2)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front tyre cracked and badly deteriorated

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Parking brake: efficiency below requirements (3.7.B.7)

rear parking brake recording little or no effort both rear (3.7.B.6a)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

both front tyres slight wear inner edges

centre exhaust heatshield insecure

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

both front tyres slight wear inner edges

centre exhaust heatshield insecure

Engine covers fitted obscuring some components in the engine bay

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

both headlamp lenses deteriorared slightly

front brake discs corroded on inner faxes

oil leak at gearbox

slight leak of grease from both inner cv boots at clips

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Engine covers fitted obscuring some components in the engine bay

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

both headlamp lenses deteriorared slightly

front brake discs corroded on inner faxes

oil leak at gearbox

slight leak of grease from both inner cv boots at clips

Both front tyres worn on inner edge

Nearside Rear Rear wheel bearing rough when rotated (2.6.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front coil spring fractured (2.4.C.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Both front tyres worn on inner edge

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Both front lower rear suspension arm bushes splitting

Offside Rear wheel bearing rough when rotated (2.6.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

205/55 VR16 -- Offside front tyre worn on inner edge

Both front lower rear suspension arm bushes split

Both rear tyres worn on inner edges -- Offside near limit --

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)