MOT Status
ExpiredMileage
183,079 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Position lamp not working (4.2.1 (a) (ii))
Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Rear Axle has excessive vertical movement between stub axle and axle beam such that the stub axle is likely to become insecure both (5.1.2 (c) (ii)) DANGEROUS
Suspension component likely to become detached rear bushes are worn (5.3.3 (a) (ii)) DANGEROUS
Alternator belt worn
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Headlamp switch does not immediately illuminate all dipped beam headlamps faulty (4.1.3 (a))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis / suspension (6.1.1 (c) (i))
exhaust corroded
Exhaust system corroded
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced suspension (6.1.1 (c) (i))
Exhaust system insecure (6.1.2 (a))
Horn not working (7.7 (a) (ii))
Nearside Position lamp not working (4.2.1 (a))
Rear Sub-frame pin or bush excessively worn both (5.3.4 (a) (i))
Exhaust system corroded
Nearside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced suspension (6.1.1 (c) (i))
Non obligatory mirror damaged ()
Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
exhaust system corrded
Front Windscreen wiper does not clear the windscreen effectively both (8.2.2)
Non obligatory mirror damaged ()
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
exhaust system corrded
Front Direction indicator slightly discoloured Both (1.4.A.2f)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Obligatory mirror obscured but not seriously affecting the rear view (8.1.2a)
Rear end box exhaust corroded
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Stop lamp not working Both (1.2.1b)
Front Direction indicator slightly discoloured Both (1.4.A.2f)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Obligatory mirror obscured but not seriously affecting the rear view (8.1.2a)
Rear end box exhaust corroded
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Headlamp aim too high (1.8)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Non obligatory mirror damaged
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Non obligatory mirror damaged
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Front position lamp(s) not working (1.1.A.3b)
Nearside Front coil spring worn (2.4.C.1b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Stop lamp not working (1.2.1b)
Nearside Front coil spring worn (2.4.C.1b)
Both headlight patterns incorect
Both headlight patterns incorect
Nearside Outer Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
How Reliable is the Fiat Stilo?
Based on 566,057 MOT tests across 43,678 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AK06 FPU is a 2006 Fiat Stilo in Black with a 1,910cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 55%.
Across all 2006 Fiat Stilo models, the average MOT pass rate is 68.0% with a typical mileage of 64,722 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Stilo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 47,634 recorded failures. If you're considering buying AK06 FPU, it's worth having these areas checked by a mechanic before committing.
The Fiat Stilo typically stays on UK roads for around 24 years. At 20 years old, this Fiat Stilo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AK06 FPU?
You can check the full history of AK06 FPU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AK06 FPU registered?
AK06 FPU is a 2006 Fiat Stilo, first registered on 30 March 2006.
Is AK06 FPU safe to buy?
The MOT history for AK06 FPU shows 20 tests with a 55% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AK06 FPU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AK06 FPU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.