2006 Kia Sorento

Brake pedal wearing smooth (1.1.2 (c))

Front Headlamp lens slightly defective both (4.1.1 (b) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Oil leak, but not excessive filter (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis and x members (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sills strong advise .outers have covers fitted (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive rod mounts all (5.3.6 (a) (i))

Nearside Front Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Anti-roll bar pin or bush excessively worn both sides d bushes (5.3.4 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Brake pedal wearing smooth (1.1.2 (c))

Front Headlamp lens slightly defective both (4.1.1 (b) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Oil leak, but not excessive filter (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis and x members (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sills strong advise .outers have covers fitted (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive rod mounts all (5.3.6 (a) (i))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive sills (7.1.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced surface corrosion starting rear chassis and x member (6.1.1 (c) (i))

sill covers fitted

Nearside Brake pipe excessively corroded Middle to rear (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Brake pipe excessively corroded Middle to rear (1.1.11 (c))

Offside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Power steering component has slight seepage from a component Drumstick (2.1.5 (a))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced U/BODY-17 YR OLD/MILES ETC ETC,, (6.1.1 (c) (i))

Items removed from driver's view prior to test ()

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Power steering component has slight seepage from a component (2.1.5 (a))

Central Exhaust mounting defective (6.1.2 (a))

Front Power steering ram has slight seepage from a joint rack gaiters camp (2.1.5 (a))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive chassis and x members (5.3.6 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive sill covers fitted (7.1.1 (a) (i))

floor pan and inner sills heavily undersealed

Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside outer sill holed & corroded (6.1.1 (c) (i))

Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced offside inner sill holed & corroded (6.1.1 (c) (i))

Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced offside outer sill holed & corroded (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Prop shaft bearing likely to break up front prop shaft bearing broken excessive play (6.1.7 (b) (ii)) DANGEROUS

Nearside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm tyre worn inner edge (5.2.3 (e)) DANGEROUS

Offside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) DANGEROUS

Central Rear Upper Stop lamp(s) non-obligatory stop lamp not working high level brake light not working (4.3.1 (a) (ii))

Exhaust mounting defective advise exhaust bracket come away but still supported (6.1.2 (a))

Nearside Front Headlamp aim too far to the left (4.1.2 (a))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front fog light not working

Offside Front steering gaiter damp

Sub-frame corroded but not seriously weakened advise front sub-frame corroding but not seriously corroded (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced advise both chassis rails corroded (6.1.1 (c) (i))

advise corrosion front lower arms, rear diff and support brackets on diff, rear suspension components.

undertrays & trims fitted within prescribed area not allowing full inspection

Nearside Rear Service brake grabbing severely (1.2.1 (c))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Parking brake lever defective so that it cannot be satisfactorily operated lever seized on rear axel (3.1.3c)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)