MOT Status
ExpiredMileage
125,944 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
rear seat belts not checked as items in rear stopping access
Nearside Front wiper blade starting to smear
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front wiper blade starting to smear
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Tyre worn close to the legal limit on 1.6mm (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Items removed from driver's view prior to test
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 3008?
Based on 1,383,456 MOT tests across 143,593 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AK12 PPU is a 2012 Peugeot 3008 in Grey with a 1,560cc diesel engine. This vehicle has been through 14 MOT tests with a personal pass rate of 71.4%.
Across all 2012 Peugeot 3008 models, the average MOT pass rate is 75.5% with a typical mileage of 65,958 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 3008 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 13,051 recorded failures. If you're considering buying AK12 PPU, it's worth having these areas checked by a mechanic before committing.
The Peugeot 3008 typically stays on UK roads for around 17 years. At 14 years old, this Peugeot 3008 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AK12 PPU?
You can check the full history of AK12 PPU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AK12 PPU registered?
AK12 PPU is a 2012 Peugeot 3008, first registered on 30 April 2012.
Is AK12 PPU safe to buy?
The MOT history for AK12 PPU shows 14 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AK12 PPU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AK12 PPU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.