2013 Peugeot 208

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Exhaust mounting defective front 50% and rear (has metal wire wrapped round) (6.1.2 (a))

Front Tyre worn close to legal limit/worn on edge Nearside (small surface cut outer) and offside 2.5mm wearing bald edges no cords/ply exposed at time. (5.2.3 (e))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt

Nearside Rear tyre surface cracking no cords/ply exposed at time

Offside Front top strut slight noise when turning

Offside Rear Nail in tyre in centre

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Slight mist of oil/staining gearbox diff outer seal area

windscreen stone chipped nearside

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt big clip broken insecure (6.1.7 (g) (ii))

Exhaust mounting defective front 50% and rear (has metal wire wrapped round) (6.1.2 (a))

Front Tyre worn close to legal limit/worn on edge Nearside (small surface cut outer) and offside 2.5mm wearing bald edges no cords/ply exposed at time. (5.2.3 (e))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt

Nearside Rear tyre surface cracking no cords/ply exposed at time

Offside Front top strut slight noise when turning

Offside Rear Nail in tyre in centre

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Slight mist of oil/staining gearbox diff outer seal area

windscreen stone chipped nearside

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords inner tread (5.2.3 (d) (i))

Rear exhaust bracket broken (may weld)

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

spare tyre low pressure advise check

Offside Front coil springs looks incorrect supect a rear spring as been fitted strong advise replace sits lower on offside

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Steering locking device ineffective track rod end locking nut (2.1.3 (d))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords inner tread (5.2.3 (d) (i))

Rear exhaust bracket broken (may weld)

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

spare tyre low pressure advise check

Offside Front coil springs looks incorrect supect a rear spring as been fitted strong advise replace sits lower on offside

Rear exhaust bracket broken from weld

Offside Rear tyre slight surface cracking between tread.

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure outer sidwall (4.1.D.1b)

Offside Rear tyre slight surface cracking between tread.

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear exhaust bracket broken from weld

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)