2013 Peugeot 208

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake disc significantly and obviously worn both (1.1.14 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust mounting defective back box (6.1.2 (a))

Nearside Front Integral body structure is deformed but structural rigidity is not significantly reduced outer sill (6.1.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge Inner/outer edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing sidewalls perished (5.2.3 (d) (ii))

Offside Obligatory mirror slightly damaged outer cover missing (3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing sidewalls perished (5.2.3 (d) (ii))

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust mounting defective back box (6.1.2 (a))

Nearside Front Integral body structure is deformed but structural rigidity is not significantly reduced outer sill (6.1.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge Inner/outer edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing sidewalls perished (5.2.3 (d) (ii))

Offside Obligatory mirror slightly damaged outer cover missing (3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing sidewalls perished (5.2.3 (d) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Horn operates at random when steering wheel is turned

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Daytime running light not working

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Exhaust mounting defective back box (6.1.2 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust mounting defective back box (6.1.2 (a))

Horn not working (7.7 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Daytime running light not working

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Wiper smear but clear screen effectively

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Front tyres worn on outer edge

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear exhaust bracket broken but exhaust still supported

Rear tyres perished

Front tyres worn on outer edge

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Rear exhaust bracket broken but exhaust still supported

Rear tyres perished

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Stop lamp not working (1.2.1b)

Offside Headlamp not working on dipped beam (1.7.5a)