2013 Peugeot 208

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Exhaust mounting defective clamp broken (6.1.2 (a))

Rear Suspension component corroded but not seriously weakened axle (5.3.3 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Headlamp are incorrectly positioned (4.1.4 (a))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Exhaust mounting defective clamp broken (6.1.2 (a))

Rear Suspension component corroded but not seriously weakened axle (5.3.3 (b) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front top mount bearing sticking slightly

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front top mount bearing sticking slightly

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Nearside front top mount bearing sticking slightly

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside front top mount bearing sticking slightly

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Nail in tyre ()

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear exhaust middle bracket split

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear exhaust middle bracket split