2001 Ford Focus

rear subframe corroded, vehicle underbody corroded but not seriously weakened

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

rear subframe corroded, vehicle underbody corroded but not seriously weakened

Brake pipe excessively corroded both front to rear (3.6.B.2c)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Trailing arm has excessive play in a pin/bush both rear (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brake pipe slightly corroded front to rears (3.6.B.2c)

Suspension component mounting prescribed area is corroded but not considered excessive rear inner sills (2.4.A.3)

front brake discs are corroded on inner face

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill area (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill area (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill area (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Brake pipe slightly corroded front to rears (3.6.B.2c)

Suspension component mounting prescribed area is corroded but not considered excessive rear inner sills (2.4.A.3)

front brake discs are corroded on inner face

Centre Brake pipe slightly corroded front to rears x2 (3.6.B.2c)

Nearside Front Brake pipe slightly corroded inner wing (3.6.B.2c)

Offside Front Brake pipe slightly corroded inner wing (3.6.B.2c)

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Rear Tyre worn close to the legal limit inner edge (4.1.E.1)

Nearside Front Radius arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp not working on dipped beam (1.7.5a)

Centre Brake pipe slightly corroded front to rears x2 (3.6.B.2c)

Nearside Front Brake pipe slightly corroded inner wing (3.6.B.2c)

Offside Front Brake pipe slightly corroded inner wing (3.6.B.2c)

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Rear Tyre worn close to the legal limit inner edge (4.1.E.1)

Brake pipe slightly corroded (3.6.B.2c)

offside rear trailing arm to body mounting bush slightly deteriorated

Brake pipe slightly corroded (3.6.B.2c)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

offside rear trailing arm to body mounting bush slightly deteriorated

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

front brake discs slight worn

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)