2003 Ford Fiesta

Emissions unable to be completed Exhaust blow (8.2.1.2 (d))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill/chassis area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill/chassis area (5.3.6 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Fuel filler neck corroded

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner arch (5.3.6 (a) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Near rear exhaust mounting, not in a prescribed area (6.1.1 (c) (i))

Fuel filler neck corroded

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Fuel filler neck corroded

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. low performance (1.2.1 (b) (i))

Offside Play in steering rack inner joint(s) ()

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive under sill (5.3.6 (a) (i))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. low performance (1.2.1 (b) (i))

Offside Play in steering rack inner joint(s) ()

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive under sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Brake pipe excessively corroded both (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Central Engine mounting bracket fractured (6.1.8 (a) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Fluid leak harmful to the environment or a risk to other road users fuel from tank breather in nearside rear wheel arch (8.4.1 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear suspension/axle signs of corrosion

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Rear Fuel hose insecure and smells of fuel (7.2.1)

Nearside Rear Brake pipe slightly corroded behind wheel (3.6.B.2c)

Offside Rear going out of shape

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

some metal brake pipes surface rusted

Brakes imbalanced across an axle (3.7.B.5b)

Brake pipe slightly corroded (3.6.B.2c)

Brakes imbalanced across an axle (3.7.B.5b)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Headlamp aim too high (1.8)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)