2004 Mazda 3

Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside and nearside wheel arches and body sill are slightly corroded

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Obligatory mirror cover missing

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Underneath has slight corrosion

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Obligatory mirror cover missing

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Underneath has slight corrosion

O/S/F Tyre tread worn on inner edge

Rear exhaust mount bracket excessively deteriorated & broken

Surface rust in various areas of front & rear suspension

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

O/S/F Tyre tread worn on inner edge

Rear exhaust mount bracket excessively deteriorated & broken

Surface rust in various areas of front & rear suspension

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Outer Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)

Rear Exhaust system not adequately supported backbox (7.1.1)

corrosion on whole underside of vehicle

exhaust rear hangar corodded.

washer jet pattern distorted sufficient water hitting screen.

both front tyres worn low on edges.

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

both front tyres worn low on edges.

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

air bag light on.

both rear tyres perished.worn to 3mm.

rear pads worn low.

air bag light on

Air bag light on

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

air bag warning lamp on