2006 Peugeot 107

rear welding repairs covered in underseal

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

rear welding repairs covered in underseal

Brake hose has slight corrosion to ferrule both rear affected (1.1.12 (f) (i))

Headlamp lens slightly defective both front affected (4.1.1 (b) (i))

welding repairs covered in underseal

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn excessive play when under load also de bonded (5.1.2 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting point corroded and holed marked with chalk (5.3.6 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn excessive play when under load also de bonded (5.1.2 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting point corroded and holed marked with chalk (5.3.6 (a) (i))

Brake hose has slight corrosion to ferrule both rear affected (1.1.12 (f) (i))

Headlamp lens slightly defective both front affected (4.1.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material corroded at limit of acceptable advise getting changed (1.1.11 (c))

Front Exhaust mounting defective (6.1.2 (a))

Front Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

welding repairs covered in underseal

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill and lower inner wheel arch area holed (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn lower arm inner rear bush (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill and lower inner wheel arch area holed (5.3.6 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material both sides front to rear pipes, section at joining rear flexi hoses (1.1.11 (c))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split (6.1.7 (g) (ii))

Nearside Rear Outer Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Central Exhaust mounting defective (6.1.2 (a))

Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Front Exhaust mounting defective mount missing (6.1.2 (a))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Play in steering rack inner joint(s) ()

unable to see brakes through steel wheels

Nearside Front wheel rim buckled

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear fog lamp not working (1.3.2b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)