2006 Audi A3

Emissions unable to be completed (8.2.1.2 (d))

Front Headlamp aim projected beam image is obviously incorrect both headlamps (4.1.2 (c))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Emissions not tested (8.2.1.2 (d))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Front Sub-frame pin or bush worn but not resulting in excessive movement Both console bushes. (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases Rear silencer. (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened discs (1.1.14 (a) (ii))

Offside Rear Coil spring corroded bottom coil (5.3.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened discs (1.1.14 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front bottom arm rear console bushes is perished (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Fuel cap/sealing device missing fuel cap seal perished/split (6.1.3 (b) (i))

Parking brake lever defective so that it cannot be satisfactorily operated release button has been broken off (1.1.6 (d))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front bottom arm rear console bushes is perished (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Parking brake lever defective but can be satisfactorily operated release button missing can till release parking brake (1.1.6 (d))

Fuel sealing cap starting to perish

Fuel cap sealing washer slightly deteriorated

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside wiper blade split

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside rear brake binding (3.7.B.1)

Fuel cap sealing washer slightly deteriorated

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside wiper blade split

Offside Rear brake binding slightly

Nearside Rear Direction indicators incorrect colour showing white light (1.4.A.2f)

Offside Rear Direction indicators incorrect colour showing white light (1.4.A.2f)

Offside Rear brake binding slightly

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Parking brake lever defective so that it cannot be satisfactorily operated (3.1.3c)

Rear registration plate character(s) likely to be misread (6.3.4b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)