2007 Ford Fiesta

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn Foremost (5.1.2 (b) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn Foremost (5.1.2 (b) (i))

Rear Fuel cap/sealing device missing (6.1.3 (b) (i))

Offside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Coil spring corroded All four springs corroded (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Lower Gearbox mounting defective

Nearside Rear Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Road wheel slightly distorted (5.2.2 (c) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced Rear of vehicle (6.1.1 (c) (i))

Central Rear Seat belt not functioning as intended (7.1.2 (c))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced Rear of vehicle (6.1.1 (c) (i))

Exhaust has a major leak of exhaust gases Centre and rear sections (6.1.2 (a))

Offside Front Brake hose ferrule excessively corroded Centre ferrule (1.1.12 (f) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced Rear of vehicle (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Central Exhaust has a minor leak of exhaust gases Centre section (6.1.2 (a))

Offside Front Brake hose has slight corrosion to ferrule Centre ferrule (1.1.12 (f) (i))

Nearside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Central Exhaust has a minor leak of exhaust gases Centre section (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge Inner and outer edges close to showing plys (5.2.3 (e))

Offside Front Brake hose has slight corrosion to ferrule Centre ferrule (1.1.12 (f) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Front arm (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Front arm (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Stop lamp(s) non-obligatory stop lamp not working high level (4.3.1 (a) (ii))

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Stop lamp(s) non-obligatory stop lamp not working high level (4.3.1 (a) (ii))

Front registration plate deteriorated but not likely to be misread (6.3.1d)

high level stop light not working

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

rear brake application uneven (3.7.B.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

high level stop light not working

Corrosion on front to rear metal brake pipes

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Metal brake pipe corroded

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Both wiper blades split

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Brakes imbalanced across an axle 37% (3.7.B.5b)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Steering lock fails to engage (2.1.4b)

Both wiper blades split

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

N/S + O/S rear tyres show signs of fowling on inside sidewalls.

Nearside Rear Road wheel slightly damaged (4.2.A.1a)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Brake pipe slightly corroded (3.6.B.2c)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Headlamp aim too high (1.8)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

N/s/r road wheel has a buckle & tyre is getting low, 2.5mm

rear exhaust silencer corroded