2006 Nissan 350 Z

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Underbody corroded

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch - multiple sections (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Top Mounting (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Top Mounting (5.3.6 (a) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Suspension arm corroded and seriously weakened subframe centre support. (5.3.3 (b) (i))

Suspension arm corroded and seriously weakened both rear subrame outer supports. (5.3.3 (b) (i))

Direction indicator slightly discoloured both rear. (4.4.3 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both front shock top mount. (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear shock top mount. (5.3.6 (a) (i))

Headlamp lens slightly defective both tarnished. (4.1.1 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

rear body support bar and brackets corroded

Brake disc worn, pitted or scored, but not seriously weakened front and rear. (1.1.14 (a) (ii))

engine covers and undertrays fitted.

number plate lamps flicker.

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Brake disc worn, pitted or scored, but not seriously weakened front and rear. (1.1.14 (a) (ii))

engine covers and undertrays fitted.

number plate lamps flicker.

Anti-roll bar linkage has excessive play in a ball joint nut looks loose (2.4.G.2)

Nearside Front exhaust hanger broken

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)